SBE HighWire HW400c/2 Specifiche Scaricare il pdf (Pagina 27)

HW400p/M Technical Reference - 1.0, March 6, 2002 Panels 27

Flash ROM There are two types of Flash ROM on the HW400p/M:

• Two contiguous 512-kByte banks for the Boot PROM. U66 is the lower

bank while U65 is the upper bank. U66 is accessed by the MPC8245

upon power up or reset.

• An optional 0/2/4/8 Mbytes of high-density Flash, comprised of two Intel

3V Advance+ Boot Block Flash devices organized as 0/512KB/1MB/2MB

x 16 bits.

CPLD The Main CPLD generates chip selects, control signals, and read/write signals

for the devices on the I/O Bus based on the address and control signals from

the MPC8245. The CPLD’s internal registers also reside on the I/O Bus and

are accessible by the MPC8245. See Section 4-7, I/O Bus Control and

Miscellaneous Logic, for register details.

4-6. Panels

Figure 4-4 shows an example of the HW400p/M I/O panel for the main board.

Figure 4-4 I/O panel

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 49 50

Nessun commento

SBE HighWire HW400c/2 Specifiche Pagina 27